Always perform a pre-ride inspection on the below before every ride.

Check tire pressure with the tire gauge in your SQ250DH-2 tool kit. Be sure they are at 15-20 psi

Check rims to make sure they are not bent or damaged

Check the level of charge on the batteries

Check the drive chain to see if it needs to be lubed or tightened

Check the brake to ensure it is working properly

Look over the entire break for loose nuts and bolts or body parts

Check the throttle to be sure it rotates freely and returns to the low position on it’s own when released

Be sure that the handlebars turn freely
Was this article helpful?
Cancel
Thank you!