Articles on: Maintenance & Repairs


Vehicle riding requires special efforts on your part to ensure your safety. Know these requirements below before you ride.

For on-road use, this vehicle is designed to be operated only on level, on road surface, free of obstacles.

Do not operate this vehicle while under the influence of alcohol or drugs. That can impair judgment and result.

Keep a safe distance between your vehicle and other vehicles.

Do not allow your child to ride without your supervision.

Never run the engine in a closed area. The exhaust gas contains poisonous carbon monoxide gas(CO).

During driving, do not touch the exhaust muffler, engine etc to refrain from scalding, for its temperature is high.

The exhaust system becomes hot during riding, and it remains hot for a while after stopping the engine. Be careful not to touch the exhaust system since it is hot.

Wear clothing that fully covers your legs.

Do not wear loose clothing that could catch on the control levers, kick-starter, footrests or wheels.


Fuel is a key factor in deciding the exhaust emissions amount from the engine, so selection of fuel must follow the rules below.

Selected fuel must be beakless or low-lead gasoline with No. RQ-90 or higher.
The fuel tank capacity is 4L.


Gasoline is extremely flammable and is explosive under certain conditions.
Refuel in a well-ventilated area with the engine stopped.
Do not smoke or sparks in the area where gasoline is stored or where the fuel tank is refueled.
Before refueling, make sure to filter fuel first.
Be careful not to spill fuel when refueling. Spilled fuel vapor may ignite.
If any fuel is spilled, make sure the area is dry before starting the engine.
Avoid repeated or prolonged contact with skin or breathing of vapor.


The quality of the engine oil plays a vital role in deciding the engine performance and service life. Engine oil must be selected in accordance with the rules below and other oils are forbidden to be used.

Engine oil recommended: gasoline engine oil Class SAE15W/40-SE or Class SE, SF, SC from API Service Classification.
The vehicle has been filled with the engine oil Class SAE 15W/40-SE class before being been delivered, and the lubricant is only suitable at a temperature range from +40°C to-10°C
Before replacing the lubricant, please drain the oil completely remaining in the crankcase, and clean the inside with clean kerosene, then fill a new one instead.

Running the engine with insufficient oil can cause serious damage to engine.

Updated on: 04/11/2021

Was this article helpful?

Share your feedback


Thank you!