Articles on: Maintenance & Repairs

OneMX- EX1S + OneMX- EX2S Pre-ride checklist

Loose Parts
Check and secure all fasteners before every ride. Make sure steering stem clamp bolts are locked properly in place. There should not be any unusual rattles or sounds from loose parts or broken components. If you are not sure, ask an experienced mechanic to check.
Check the brake for proper function. When you squeeze the lever, the brake should provide positive braking action.

Frame, Fork and Handlebars
Check for cracks or broken connections. Although broken frames are rare, it is possible for an aggressive driver to bash into a curb or wall and wreck and bend or break a frame. Get in the habit of inspecting yours regularly.

Tire Inflation
Periodically inspect the tires for excess wear, and regularly check the tire pressure and re-inflate as necessary. If you get a flat tire, the inner tube can be patched or a new tube can be purchased from an authorized repair shop

Safety Gear
Always wear proper protective equipment such as an approved safety helmet, elbow pads and knee pads. Always wear shoes (lace-up shoes with rubber soles), never drive barefooted or in sandals, and keep shoelaces tied and out of the way of the wheels, motor and drive system


We recommend checking all tightening's after the first time use. Special attention should be paid to the following parts:
Shock absorber
Engine bolts and nuts
Front & rear wheel bolts
Rear sprocket

Updated on: 04/11/2021

Was this article helpful?

Share your feedback


Thank you!