OneKart-PX3S- Spark Plug Maintenance
Some points that you may find useful for the maintenance of the spark plug on the PX3S One Kart -
This Go Kart comes equipped with 1 an CHDY - E6TC spark plug.
To inspect the spark plug, remove the plug cap , then remove the spark plug from the engine with the spark plug tool provided.
Inspect the plug for carbon deposits and clean if necessary with a wire brush. If the plug shows excessive carbon, replace the plug.
Use a thickness feeler to inspect the spark plug gap. The spark plug gap should be 0.6 - 0.8mm (0.024 - 0.032 in.)
This Go Kart comes equipped with 1 an CHDY - E6TC spark plug.
To inspect the spark plug, remove the plug cap , then remove the spark plug from the engine with the spark plug tool provided.
Inspect the plug for carbon deposits and clean if necessary with a wire brush. If the plug shows excessive carbon, replace the plug.
Use a thickness feeler to inspect the spark plug gap. The spark plug gap should be 0.6 - 0.8mm (0.024 - 0.032 in.)
Updated on: 10/03/2022
Thank you!