If your bike does not turn on then this will be down to 1 of 3 things.

1 - A connection is out of place. There are a few area's to check, firstly the battery connection. Secondly the connections to the main board and thirdly the connections to the on/off switch. If all of these are connected you can eliminate a connection issue as only these 3 parts would not allow it to power on at all.
|| 2 - Depleted battery, we would recommend to test the batteries on a voltage meter if you are able to do this. If you are not able to we do have a video which can help you diagnose a battery fault - https://www.youtube.com/watch?v=s3j0wPk7IBA&t=
|| 3 - On/Off Switch is faulty. There is no way of testing this as such without replacing the part so if you can eliminate the other 2 issues and can confirm you need a replacement on/off switch we can send this out to you (this applies to buttons or key starts)

If you have managed to verify which part it is you require please send a message to our agents via the contact form confirming your details + part required.

Contact Form

Please note batteries only come with a standard 30 day coverage, if you have found the battery to be the issue and you have not purchased the battery warranty the battery would need to be purchased.
Was this article helpful?
Cancel
Thank you!